|
Marine Operations Institute of Marine and Coastal
Sciences |
|
R/V ARABELLA The R/V ARABELLA is a 48 ft (14.6 meter) fiberglass research vessel, built in 1996 by DUFFY & DUFFY CUSTOM YACHTS, BROOKLIN, MAINE. The R/V ARABELLA was designed as a near shore up to 50 miles platform capable of a wide range of scientific needs such as trawling, grab sampling, diving, seismic profiling, coring, etc.
ARABELLA is powered by a single DETROIT 12V71TA, diesel engine turning a 38x34, 5 blade wheel. The gear is a TWINDISC, 514, equipped with Trolling valve for 1 to 2 knot operation. The vessel has an extensive hydraulic system to supply power for A-Frame, single drum deck winch, vertical capstan, bow thruster, and anchor windlass. A-Frame lifting capacity is approximately 2500lbs and can handle dimensions of 10 ft high, with a foot print of approximately 8 ft. ARABELLA has a mast and boom capable of over-the-side operations (boom lifting capacity is 1000 lbs). AC electric is supplied by a single 12.5 Kw 3-phase, 208/110 v, 50 amp NORTHERN LIGHTS M843 generator. ARABELLA is equipped with a Marine Air reverse cycle heating and air conditioning system. ARABELLA also has a 17 CFM ROL-AIR air compressor for supporting surface supplied diving operations. Electronics consist of the following
Deck winch is equipped with a 4-conductor slipring and 900 ft electro-mechanical
wire capacity. Safety Equipment:
For information about ship and rates please contact Rose Petrecca, (609) 296-5260 ext 238. |
| Back
|